Ceramiczne efektory końcowe z tlenku glinu do obsługi płytek półprzewodnikowych
- MSJ/AL-013
- Ceramika z tlenku glinu
- Dostosowane
- 5 sztuk każdego typu
- Przemysł półprzewodników
Efektor końcowy z ceramiki z tlenku glinu produkowany przez firmę Mascera, używany jako robotyczna ręka do przenoszenia i przenoszenia płytek półprzewodnikowych. Charakteryzuje się precyzyjnymi wymiarami i stabilnością termiczną, a jego gładka i odporna na ścieranie powierzchnia zapewnia brak zanieczyszczeń cząstkami stałymi podczas przenoszenia płytek.
Wszelkie zapytania prosimy kierować na adres e-mail info@mascera-tec.com lub dzwonić pod numer 86 13860446139
Product Detail
Wafer handling end effectors are installed on wafer handling robots and are responsible for transporting silicon wafers to designated positions. The surface of the end effector comes into direct contact with the wafers. Therefore, the end effector must have precise dimensions and thermal stability, as well as a smooth, abrasion-resistant surface to ensure that no particulate contamination occurs during wafer handling.
Due to the properties of alumina ceramics, such as high-temperature resistance, wear resistance, corrosion resistance, and low friction coefficient, with a maximum operating temperature of up to 1750°C, they exhibit excellent thermal stability and superior mechanical, electrical, and thermal properties. These characteristics make them highly suitable for high-quality components and ensure that the performance requirements of wafer handling end effectors are met.
Mascera's ceramic end effectors are made from high-purity alumina powder through isostatic pressing, high-temperature sintering, and precision machining, offering excellent surface finish and dimensional accuracy to meet the customization needs of users.
Product Features
High hardness and wear resistance
Excellent corrosion resistance
Good insulation properties even at high temperatures
Excellent heat resistance
Superior mechanical strength
Material Data Sheet
Material | Unit | 99.5% Al2O3 | 99.8% Al2O3 |
Purity | % | 99.5 | 99.8 |
Color | --- | Ivory | Ivory |
Density | g/cm3 | 3.90 | 3.92 |
Water Absorption | % | 0 | 0 |
Moh's Hardness | --- | 9 | 9 |
HV Hardness | --- | 1750 | 1800 |
Flexural Strength @25℃ | Mpa | 375 | 390 |
Fracture Toughness | Mpa.M1/2 | 4 | 4 |
Compressive Strength (25℃) | Mpa | 2450 | 2500 |
Thermal Conductivity @25℃ | W/M.K | 29 | 32 |
Thermal Expansion Coefficient | 10-6mm/℃ | 8 | 8 |
Thermal Shock Resistance | △T(℃) | 180-200 | 180-200 |
Max. Working Temperature | ℃ | 1750 | 1750 |
Dielectric Strength | Kv/Mm | 22 | 22 |
Electrical Resistivity (@25℃) | Ω.Cm | 1014 | 1014 |
Dielectric Constant (@1MHz, 25℃) | --- | 9.7 | 9.8 |
Dielectric Loss (Tan Delta) | --- | 0.0001 | 0.0001 |
Packing & Shipment
| Package type | carton box with foam protection |
| Payment terms | TT / Western Union / Paypal 50% payment in advanced and 50% before shipment |
| Loading port | Xiamen, China |
| Shipping way | By sea / air / door-to-door express |
Jesteśmy profesjonalnym producentem ceramiki technicznej, zapewniamy produkcję na zamówienie w konkurencyjnej cenie....more
